MAC215990
161
Revision A
1.
Start the engine.
2.
Lower the reel fully.
3.
Raise the header fully.
4.
Shut down the engine, and remove the key from the ignition.
5.
Engage the header safety props. For instructions, refer to the combine operator
’
s manual.
1029352
A
B
C
Figure 3.188: Optional Crop Divider
6.
If optional storage bracket is installed. Remove crop
divider (A) from storage position by lifting the crop divider
so that bolt (B) clears the slot in storage bracket (C).
7.
If not installed, retrieve crop dividers from where they were
stored.
8.
Open the endshield. For instructions, refer to
1029248
A
B
C
Figure 3.189: Crop Divider with Latch
9.
Insert crop divider lugs (A) into holes in the endsheet
as shown.
10. Remove lynch pin (B) from latch (C).
1031885
A
B
Figure 3.190: Crop Divider with Latch
11. Lift the forward end of latch (A) and crop divider (B).
