MAC215990
398
Revision A
Removing Plastic Fingers
Plastic reel fingers are secured to the tine tube with a single Torx® screw.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
WARNING
To prevent bodily injury from the fall of a raised reel, always engage the reel safety props before going under the
raised reel for any reason.
1.
Lower the header fully.
2.
Raise the reel fully.
3.
Shut down the engine, and remove the key from the ignition.
4.
Engage the reel safety props. For instructions, refer to
Engaging Reel Safety Props, page 37
.
1001249
A
Figure 4.288: Removing Plastic Finger
5.
Remove screw (A) using a Torx
®
Plus 27 IP socket wrench.
1001250
Figure 4.289: Removing Plastic Finger
6.
Push the clip at the top of the finger back towards the reel
tube as shown and remove the finger from the tube.
