MAC215990
37
Revision A
3.2.2
Reel Safety Props
The reel safety props are located on the reel arms. When engaged, the reel safety props prevent the reel from falling
unexpectedly.
IMPORTANT:
To prevent damage to the reel support arms, do
NOT
transport the header with the reel safety props engaged.
Engaging Reel Safety Props
Engage the reel safety props anytime you need to work around a raised reel. When engaged the reel safety props prevent
the reel from unexpectedly lowering.
DANGER
To prevent injury or death from the unexpected start-up of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Shut down the engine, and remove the key from the ignition.
Outer reel arms
1028195
A
B
Figure 3.3: Outer Right Arm
2.
Raise the reel to its maximum height.
3.
Lift up on safety prop (A) and push it forward to remove
the prop from hook (B).
1028180
A
Figure 3.4: Engaged Reel Safety Prop
–
Outer
Right Arm
4.
Lower safety prop (A) and engage it on the cylinder shaft as
shown. Repeat on the opposite arm.
