MAC215990
410
Revision A
1024531
B
A
C
D
Figure 4.319: Tine Tube Reinforcing Kit Opposite
Support
–
Option
23. On each reel, there are two left-facing supports (A). Rotate
support (A) until its flanges clear channels (C) before
moving the support onto bushing (B).
NOTE:
If necessary, move tine tube (D) slightly away from the reel
to allow the support flange enough room to clear the
channel.
1001245
A
B
Figure 4.320: Bushing
24. Install bushing clamp (A) onto the tine tube adjacent to the
flangeless end of bushing (B).
25. Position clamp (A) on bushing (B) so the edges of the clamp
and bushing are flush when the clamp is fit into the groove
on the bushing and the lock tabs are engaged.
1009869
A
B
Figure 4.321: Installing Clamp
26. Tighten clamp (A) using modified channel lock pliers (B)
until finger pressure will
NOT
move the clamp.
IMPORTANT:
Overtightening the clamp may result in breakage.
