MAC215990
300
Revision A
1017301
A
B
Figure 4.102: Auger Finger Hole
8.
Remove and retain two bolts (A) and the tee nuts (not
shown) securing finger guide (B) to the auger. Remove
guide (B).
1017305
B
A
Figure 4.103: Plug Installed in Auger
9.
Place plug (A) in the hole from inside the auger. Secure the
plug with two M6 hex head bolts (B) and tee nuts. Torque
the bolts to 9 Nm (80 lbf
∙
in).
NOTE:
Bolts (B) come with a threadlocker patch that will wear off
if the bolts are removed. If reinstalling bolts (B), apply
medium-strength threadlocker (Loctite® 243 or equivalent)
before installation.
1019338
B
A
Figure 4.104: Auger Access Hole Cover
10. Secure access cover (B) with bolts (A). Torque the bolts to
9 Nm (80 lbf
∙
in).
NOTE:
Bolts (A) come with a threadlocker patch that will wear off
if the bolts are removed. If you are reusing bolts (A), apply
medium-strength threadlocker (Loctite® 243 or equivalent)
to the threads of the bolts before you install them.
