MAC215990
94
Revision A
1017236
1
2
A
A
A
A
3
B
B
Figure 3.71: Auger Configurations
–
Rear View
1 - Narrow Configuration
2 - Ultra Narrow Configuration
3 - Medium Configuration
To convert to Medium Configuration from Narrow or Ultra
Narrow Configuration:
Two flighting kits (MAC357233 or B7344
) are required. You
will need to replace long flightings (A)
51
with short flightings (B)
and install additional auger fingers. A total of 22 auger fingers is
recommended for this configuration.
•
For flighting replacement instructions, refer to
and
.
•
For finger installation instructions, refer to
1034027
A
A
Figure 3.72: Ultra Wide Configuration
To convert to Medium Configuration from Ultra Wide
Configuration:
Two flighting kits (MAC357233 or B7344
) are required. You
will need to install four short flightings onto the existing welded
flightings (A) and remove the extra auger fingers. A total of 22
auger fingers is recommended for this configuration.
•
For flighting installation instructions, refer to
•
For finger removal instructions, refer to
51. The quantity of existing long flightings is either 4 or 8, depending on the current configuration.
