MAC215990
430
Revision A
1028918
A
B
C
C
Figure 4.366: Reel Drive Motor
2.
Attach motor (A) to motor mount (B) with four
M12 x 40 mm countersunk screws and nuts (C).
3.
Torque the hardware to 95 Nm (70 lbf·ft).
4.
If a new motor is being installed, install the hydraulic
fittings (not shown) from the original motor on the
new motor.
1028886
B
A
Figure 4.367: Reel Drive
5.
Align the keyway in sprocket (B) with the key on the motor
shaft. Slide the sprocket onto the shaft. Secure it with
slotted nut (A).
6.
Torque slotted nut (A) to 12 Nm (106 lbf
∙
in).
7.
Install the cotter pin. If necessary, tighten castle nut (A) to
the next slot to install the cotter pin.
1028883
B
A
Figure 4.368: Reel Drive
8.
Install drive chain (A) onto drive sprocket (B).
