MAC215990
204
Revision A
1023920
A
Figure 3.258: New Holland Combine Display
14. From REEL HEIGHT SENSOR menu (A), select YES.
Setting up Reel Speed
–
New Holland CR Series
The reel diameter and reel displacement settings will need to be entered into the combine
’
s computer before the reel can
be operated.
NOTE:
Changes may have been made to the combine controls or the display since this document was published. Refer to the
combine operator
’
s manual for the most up-to-date information.
NOTE:
This section applies only to 2015 and later CR models (6.80, 6.90, 7.90, 8.90, 9.90, and 10.90).
1.
Shut down the engine.
2.
Turn the key to the run position.
3.
Ensure that the combine display software is updated to the relevant version specified below or better:
•
Combines from model years 2015
–
2018: UCM v38.10.0.0
•
Combines from model year 2019 or newer: UCM v1.4.0.0
1016056
A
Figure 3.259: New Holland Combine Display
4.
Ensure the center-link is set to
D
.
5.
Select TOOLBOX (A) on the main page. The TOOLBOX page
appears.