MAC215990
55
Revision A
3.6
Header Attachment/Detachment
This chapter includes instructions for configuring, attaching, and detaching the header.
Combine
Refer to
New Holland CR and CX Series
3.6.1 New Holland Combines, page 55
NOTE:
Ensure the applicable functions (automatic header height control [AHHC], draper header option, hydraulic center-link
option, hydraulic reel drive) are enabled on the combine and the combine computer. Failure to do so may result in
improper header operation.
3.6.1
New Holland Combines
To attach the header to or detach it from a New Holland combine, follow the relevant procedure in this section.
Refer to the table below for information on the New Holland combine models that are compatible with this header.
New Holland Combine Compatibility
New Holland Combine Series
Combine Model
920, 940, 960, 970, 980
CR
9020, 9040, 9060, 9065, 9070, 9080
6090, 7090, 8080, 8090, 9090
6.80, 6.90, 7.90, 8.90, 9.90, 10.90
840, 860, 870, 880
CX
8070, 8080, 8090
8080 Elevation, 8090 Elevation
Attaching Header to New Holland CR or CX Combine
The header will need to be physically connected to the combine
’
s feeder house, and the electrical and hydraulic
connections completed.
DANGER
To prevent injury or death from the unexpected start-up of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
