MAC215990
379
Revision A
2.
Raise the header fully.
3.
Raise the reel fully.
4.
Shut down the engine, and remove the key from the ignition.
5.
Engage the header safety props. For instructions, refer to the combine operator
’
s manual.
6.
Engage the reel safety props. For instructions, refer to
Engaging Reel Safety Props, page 37
.
1032009
A
Figure 4.251: Tensioner
–
Left Side Shown
7.
Loosen the draper by turning adjuster bolt (A)
counterclockwise until the adjuster bolt runs out of
adjustment and hits a hard stop.
1032007
A
B
B
C
D
A
B
C
D
Figure 4.252: Draper Connectors
8.
Remove screws (C), bridge connector (D), and nuts from the
front end of the draper joint.
9.
Remove nuts and screws (A) and tube connectors (B) from
the draper joint.
10. Pull the draper off the idler roller.
