MAC215990
444
Revision A
4.16.2
Lubricating Vertical Knife
Each vertical knife has two lubrication points, which can be accessed by removing the knife
’
s service panel.
Use high temperature high temperature extreme pressure (EP2) performance lubricant with 1% max molybdenum
disulphide (NLGI Grade 2) lithium base to lubricate the vertical knives.
1034824
A
A
Figure 4.394: Grease Zerks on Vertical Knife
Push Rods
Lubricate vertical knife push rods (A) after they are first installed
and every 50 operating hours thereafter.
To lubricate the vertical knife push rods, follow these steps:
NOTE:
Some parts have been removed from the illustrations for clarity.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and
remove the key before leaving the operator
’
s seat, and always engage the safety props before going under the
machine for any reason.
1.
Lower the header to the ground.
2.
Shut down the engine, and remove the key from the ignition.
1034825
A
B
Figure 4.395: Vertical Knife Access Cover
3.
Remove screws (A). Remove access cover (B).
