MAC215990
361
Revision A
ϭϬϯϴϯϴϵ
A
A
B
Figure 4.218: Left Idler Roller Bearing
7.
Remove the socket head bolts, washers, and nuts (A) that
secure the bearing housing to the deck skid and tensioner
8.
Remove dust cap (B).
1028256
A
B
Figure 4.219: Idler Roller Bearing
–
Left Side
9.
Remove nut (A), and remove bearing housing (B) from
the deck.
NOTE:
If the bearing is seized on the shaft, it may be easier to
remove the idler roller assembly. For instructions, refer to
Removing Feed Draper Idler Roller, page 355
.
1027881
A
B
D
C
Figure 4.220: Bearing Assembly
10. Secure housing (D), and remove internal retaining ring (A),
bearing (B), and two seals (C).
11. Apply oil to the bore before assembling the parts.
12. Install seals (C) into housing (D).
NOTE:
Ensure the flat side of the seal is facing inward.
13. Pack bearing (B) with grease and install as shown.
14. Install retaining ring (A).
