MAC215990
27
Revision A
2.2
D2 Series Draper Header Specifications
The following symbols and letters are used in specification tables.
D2 | FM200 | Attachments
S: standard / O
F
: optional (factory installed) / O
D
: optional (dealer installed) /
–
: not available
Header Specifications
Cutterbar
Effective cutting width (distance between crop divider points)
7.6 m (25 ft.) header
7,658 mm (301.5 in.)
S
9.1 m (30 ft.) header
9,182 mm (361.5 in.)
S
10.7 m (35 ft.) header
10,706 mm (421.5 in.)
S
12.5 m (41 ft.) header
12,535 mm (493.5 in.)
S
13.7 m (45 ft.) header
13,754 mm (541.5 in.)
S
Cutterbar lift range
Varies with combine model
—
Frame and Structure
Feature
Reference
Dimension
Header width (field position)
For the effective cutting width, see the
Cutterbar section.
Effective cut width
plus 500 mm (19.5 in.)
Cutterbar width
For the effective cutting width, see the
Cutterbar section.
Effective cut width
minus 76 mm (3 in.)
Knife
Single-knife drive 7.6
–
10.7 m (25
–
35 ft.): One hydraulic motor mounted to an enclosed heavy duty knife
drive box on the left side of the header.
O
F
Double-knife timed drive 12.5
–
13.7 m (41 and 45 ft.): Each end of the header has one hydraulic motor
mounted to an enclosed heavy duty knife drive box. Each knife is timed electronically using hydraulic valves
and position/speed sensors.
O
F
Knife stroke
76 mm (3 in.)
S
Single-knife speed
7.6 m (25 ft.) header
1200
–
1400 (strokes/min.)
S
Single-knife speed
9.1 m (30 ft.) header
1200
–
1500 (strokes/min.)
S
Single-knife speed
10.7 m (35 ft.) header
1100
–
1400 (strokes/min.)
S
Double-knife speed
12.5 m and 13.7 m (41 ft. and
45 ft.) headers
1200
–
1500 (strokes/min.)
S
Knife Sections
Over-serrated, ultra coarse, ClearCut
™
, quick change, 4 serrations per inch
O
F
Over-serrated, coarse, ClearCut
™
, quick change, bolted, 9 serrations per inch
O
F
