
MAC215990
433
Revision A
1001323
A
Figure 4.374: U-Joint
9.
Position the right reel tube against the reel drive and
engage the stub shaft into the U-joint pilot hole.
10. Rotate the reel until the holes in end of the reel tube and
U-joint flange line up.
11. Apply medium-strength threadlocker (Loctite
®
243 or
equivalent) to four 1/2 in. bolts (A) and secure them to the
flange with lock washers.
12. Torque bolts (A) to 109 Nm (80 lbf
∙
ft).
1013936
A
Figure 4.375: Supporting Reel
13. Remove temporary reel sling (A).
14. Tighten the drive chain. For instructions, refer to
.
15. Reinstall the reel drive cover. For instructions, refer to