MAC215990
192
Revision A
Header Settings
–
New Holland CR Series (continued)
Setup Parameter
Suggested Setting
HHC tilt sensitivity
Set for best performance
Reel height sensor
Yes
Setting up Auto Header Height Control
–
New Holland CR and CX Series
Auto header height control (AHHC) is set up using the combine display.
NOTE:
Changes may have been made to the combine controls or the display since this document was published. Refer to the
combine operator
’
s manual for the most up-to-date information.
NOTE:
For New Holland CR models 6.80, 6.90, 7.90, 8.90, 9.90, and 10.90, refer to
1003581
Figure 3.233: New Holland Combine Display
1.
Select HEADER LATERAL FLOAT on the combine display, and
press ENTER.
2.
Use the up and down navigation keys to move between
options, and select INSTALLED.
1003582
Figure 3.234: New Holland Combine Display
3.
Select HEADER AUTOFLOAT, and press ENTER.
4.
Use the up and down navigation keys to move between
options, and select INSTALLED.
