MacDon NEW HOLLAND D2 Series, Operator'S Manual

Page: 263 / 520

MAC215990
243
Revision A
S
Upper cross auger right bearing; refer to Every
50 Hours, page 250
S
Upper cross auger sliding hubs; refer to Every
50 Hours, page 250
S
Upper cross auger center support and U-joint;
refer to
Every 50 Hours, page 250
S
Float module auger pivots; refer to Every 50
Hours, page 250
S
Feed draper roller bearings, 3 locations; refer
to
Every 50 Hours, page 250
S
Reel drive chain (If chain is dry at next oiling
interval
–
consider decreasing oiling interval.);
refer to Every 50 Hours, page 250
p
Knife drive box lubricant (first 50 hours only);
refer to
Changing Oil in Knife Drive Box, page
341
p
Header drive main gearbox lubricant (first 50
hours only); refer to
Changing Oil in Header
Drive Main Gearbox, page 263
p
Header drive completion gearbox lubricant
(first 50 hours only); refer to
Changing Oil in
Header Drive Completion Gearbox, page 266
ü
Auger to pan and feed draper clearance; refer
to
4.7.1 Adjusting Feed-Auger-to-Pan
Clearance, page 284
ü
Main gearbox lubricant level; refer to
Checking Oil Level in Header Drive Main
Gearbox, page 262
ü
Completion gearbox lubricant level; refer to
Checking Oil Level in Header Drive Completion
Gearbox, page 264
ü
Reel drive chain tension; refer to 4.14.1 Reel
Drive Chain, page 421
ü
Reel finger/cutterbar clearance; refer to
4.13.1 Reel-to-Cutterbar Clearance, page 389
ü
Wheel bolt torque; refer to 4.15.1 Checking
Wheel Bolt Torque, page 434
ü
Knife drive box lubricant level; refer to
Checking Oil Level in Knife Drive Box , page
340
ü
Knife drive box mounting bolts; refer to
Checking Mounting Bolts, page 341
MAINTENANCE AND SERVICING