MAC215990
434
Revision A
4.15 Transport System
–
Option
The header can be equipped with a set of transport wheels, so that the header can be towed by a combine or tractor.
Refer to
for more information.
4.15.1
Checking Wheel Bolt Torque
The transport wheel bolt torque should be checked after one operating hour following the installation of the wheels, and
every 100 operating hours thereafter.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
1.
Shut down the engine, and remove the key from the ignition.
1001277
2
3
4
5
6
1
Figure 4.376: Bolt Tightening Sequence
2.
Follow the bolt tightening sequence shown, and torque the
wheel bolts to 115 Nm (85 lbf
∙
ft).
IMPORTANT:
Whenever a wheel is removed and reinstalled, check the
wheel bolt torque after 1 hour of operation and every 100
hours thereafter.
4.15.2
Checking Transport Assembly Bolt Torque
The hardware that secures the optional transport system components to the header must be checked daily to ensure safe
operation.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
