MAC215990
215
Revision A
NOTE:
Changes may have been made to the combine controls or the display since this document was published. Refer to the
combine operator
’
s manual for the most up-to-date information.
1.
Shut down the engine.
2.
Turn the key to the run position.
1015005
A
B
Figure 3.284: New Holland Combine Controls
3.
Simultaneously press UNLOAD (A) and RESUME (B) buttons
on the control handle.
1015006
A
Figure 3.285: New Holland Combine Display
4.
On the HEAD 1 page, change the CUTTING TYPE from FLEX
to PLATFORM as shown at location (A).
1015007
A
Figure 3.286: New Holland Combine Display
5.
On the HEAD 2 page, change HEADER SUB TYPE from
DEFAULT to 80/90 as shown at location (A).
