Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 1123 / 2536

SET-STS1 4 of 1 Page SET-STS1
NAME
Characteristics STS-1 Set set-sts1:
FORMAT INPUT
set-sts1: Address
:
dgr= SignalDegrade
:
sfail= SignalFailure
[,
nsa= Alarm
]
[,
sa= Alarm
];
DESCRIPTION
STS-1 for parameters of types three following the provisions command This
channels:
Threshold: Alarm Degrade Signal
example, (for channels ring for provisioned only is parameter This
are systems ring in extensions linear optical on channels STS-1 incoming
10 are values Possible monitored). not
−
5
10 through
−
9
default a with ,
10 and earlier, and 9.0 Release for (0) zero of value
−
6
and 9.1 Release for
and 11.0 (Release 24G-U 22F2-U, and 27-type, 22-type, the Only later.
the support packs circuit OLIU later) and 15.0 (Release 29G-U and later),
function. degrade signal provisionable
Threshold: Alarm Fail Signal
are values Possible channels. ring for provisioned only is parameter This
10
−
3
10 and
−
6
10 of value default a with ,
−
3
.
Condition: AIS Path STS SA/NSA for Level Alarm
be can condition AIS path (SA) affecting service a for level alarm The
a for level alarm The channels. non-ring and ring both for provisioned
for provisioned be only can condition AIS path (NSA) affecting non-service
releases. ring
are: parameters input The
Address
channels. STS-1 the identifies Address
Addresses: Linear and Ring Valid
{a,b}-{1-2,all} c-{1-3,all}, m-{1-3,all}, all,
m-{1-3,all} all,
{a,b,c}
Addresses) (EC-1
{m,a,b,c}-{1,2,all}
Addresses) OLIU (27-type
{a,b,c}-1
Addresses) OLIU (26G2-U
15.0) Release (OC-3 29-type or 24-type with equipped is shelf the If
are: Addresses unit Main valid the slots, unit Main its in OLIUs
m-{1-12,all}
OC-3 DDM-2000
2000 February 2 Issue
11-453