Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 835 / 2536

RLS-LPBK-T3 2 of 1 Page RLS-LPBK-T3
NAME
Release-Loopback-T3 rls-lpbk-t3:
FORMAT INPUT
rls-lpbk-t3: Address
[:
lpbktype= LoopbackType
];
DESCRIPTION
an by established previously port DS3 a on loopback a releases command This
opr-lpbk-t3
the on loopbacks of types both establishing Since command.
OC-3 DDM-2000 in pack circuit TMUX BBG20 the for allowed is address same
type the include to enhanced been has command this releases, later and R13.0
released. be to loopback of
is: parameter input The
Address
released. be to is loopback a where port(s) DS3 of Address
BBG4B): (BBG4, Addresses Port DS3 Valid
{a,b,c,all}
BBG20): and BBG4B, (BBG4, Addresses Port DS3 Valid
{a,b,c,all}
(BBG19): Addresses Port DS3 Valid
{a,b,c}-{1-2,all} all,
lpbktype
facility. or terminal is loopback the whether specifies Loopbacktype
pack circuit TMUX BBG20 the to applicable only is parameter This
For releases. later and R13.0 OC-3 DDM-2000 in
a at loopback of type one only packs, circuit BBG4/BBG4B/BBG19
are: values Valid address. given a on allowed is time
terminal
speed high the towards directed is loopback terminal
value. default the is This facility.
facility
DSX-3. the towards directed is loopback facility
OC-3 DDM-2000
2000 February 2 Issue
11-165