Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 757 / 2536

ENT-CRS-VT1 17 of 1 Page ENT-CRS-VT1
NAME
VT1.5 Cross-Connection Enter ent-crs-vt1:
FORMAT INPUT
ent-crs-vt1
:
Address1
,
Address2
[:
cct=CrsType
][,
ring=RingId
];
DESCRIPTION
and Main among cross-connections VT1.5 bidirectional sets command This
various with systems OC-3 to applied be may and slots unit function
arrangements.
Main the in packs circuit OLIU of presence the require cross-connections All
be must packs circuit OLIU 27-type or 29-type 24-type, 22-type, The slots.
linear in Additionally, cross-connections. VT1.5 establish to order in present
if entered be only may cross-connections systems,
crs= manual
the by set as ,
set-ne
command.
and software, 9 Release OC-3 with available is pack circuit OLIU 27-type The
OC-3 with available is pack circuit OLIU 24-type The releases. ring later
is pack circuit OLIU 29-type The releases. ring later and software 11.0 Release
releases. ring later and software 15.0 Release OC-3 with available
1: NOTE
be to STS-1s three to up allow will pack circuit interface OC-12 24G-U The
to have will any) (if channels STS-1 remaining the cross-connected; VT
cross-connects. pass-through ring STS-1 as continue
2: NOTE
for selected be can interface OC-12 29-type the on STS-1s 12 the of Any
cross- Pass-Through for or Units Function to connection cross- VT
cross-connected add-drop be can channels VT1.5 196 to Up connections.
ring. OC-12 the on groups Unit Fn to ring OC-12 the from
established. be cannot b-3-x-y and a-3-x-y to cross-connects VT1.5
pass- OC-1 establish to used be must packs circuit OLIU 26G2-U or 27G2-U
connections cross 0x1 OC-1 unit, function a within connections cross through
cross- drop local hairpin OC-1 and slots, unit function between and within
later.) and 13.0 Release in available is support (26G2-U connections.
supported be will pack circuit (BBF9) LAN IMA the 15.0, Release with Starting
shelf. OC-3 an of slots Speed Low the in allowed and
OC-3 DDM-2000
2000 February 2 Issue
11-87