TAP-107
: Trouble Clearing
363-206-285
Page 17 of 28
Issue 2, February 2000
DDM-2000 OC-3 M
ULTIPLEXER
inc IMA Grp Abort FE
Status
This status message indicates that the far-end IMA
LAN circuit pack was unable to negotiate a
mutually acceptable IMA configuration with the
near-end IMA termination. The system was unable
to transition the IMA group into the operational
state. This message has the source address of an
IMA LAN port (e.g.
a-1
).
Likely causes: The near-end or far-end IMA
termination may need a provisioning change to
achieve mutually acceptable configuration
parameters.
inc IMA Grp Fail Startup NE
Status
This status message indicates that the near-end
IMA LAN circuit pack is stuck in the IMA Group
Startup state. This could result from a near-end
IMA LAN circuit pack failure or if the far-end IMA
LAN circuit pack does not acknowledge the
near-end’s transition to the Startup State. This
message has the source address of an IMA LAN
port (e.g.
a-1
).
inc IMA Grp Fail Startup FE
Status
This status message indicates that the far-end IMA
LAN circuit pack is stuck in the IMA Group Startup
state. This could result from a far-end IMA LAN
circuit pack failure or if the near-end IMA LAN
circuit pack does not acknowledge the far-end’s
transition to the Startup State. This message has
the source address of an IMA LAN port (e.g.
a-1
).
inc IMA Grp Insuff Links NE
Status
This status message indicates that the near-end
IMA LAN circuit pack has not detected sufficient
links to transition the IMA Group into the
operational mode. The IMA LAN circuit pack
requires only one good link to transition into
operational mode. This message has the source
address of an IMA LAN port (e.g.
a-1
).
inc IMA Grp Insuff Links FE
Status
This status message indicates that the far-end IMA
LAN circuit pack has not detected sufficient links to
transition the IMA Group into the operational mode.
The IMA LAN circuit pack requires only one good
link to transition into operational mode. This
message has the source address of an IMA LAN
port (e.g.
a-1
).
Table B – RTRV-ALM Message Descriptions (Continued)
Description
Alarm
Level
Meaning
Summary of Contents for DDM-2000 OC-3
