Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 575 / 2536

363-206-285
Maintenance Description
Issue 3 June 2001 9-53
DS3 Performance Monitoring (PM) 9
The DS3 PM is enabled as specified in Table 9-5.
Table 9-5. DS3 Performance Monitoring Enabling
DS3 Path 9
CV-P Coding Violations 9
CV-P coding violations are a count of the number of P-bit, adjusted F&M bit, or
near-end and far-end C-bit parity errors in the DS3 signal received from the fiber
and the DSX-3. To detect degradation of the signal, these errors are counted and
thresholded independently for all DS3 interfaces provisioned in VM or VMR
mode. By provisioning all NEs in the DS3 path to the VM mode, CV-Ps can be
used as a DS3 path performance parameter when the P-bit option is selected.
When the F&M-bit or C-bit option is selected, NEs could be provisioned in VMR
or VM mode (see Table 9-6).
Severely Errored Frame Seconds (SEFS) 9
SESF are a count of the number of seconds during which an OOF or AIS
condition exists for a DS3 signal received from the fiber or the DSX-3, or during
an unprotected DS3 circuit pack failure. SEFSs are counted and thresholded
independently for all DS3 interfaces provisioned in VM or VMR mode.
Errored Seconds (ES-P) 9
An "errored second" is a second in which one or more DS3 P-bit, adjusted F&M-
bit, or near-end and far-end C-bit coding violations are detected. ES are not
counted during UAS. ES are counted and thresholded independently for each
DS3 path terminated by the system.
Severely Errored Seconds (SES-P) 9
A "severely errored second" is a second in which 44 or more DS3 P-bit, adjusted
F&M-bit, or near-end and far-end C-bit coding violations are detected. SES-P are
not counted during UAS. SES are counted and thresholded independently for
each DS3 path terminated by the system.
DS3 Port State
Mode
VMR VM CC
IS (In Service) Yes Yes No
AUTO No No No
NMON (Not Monitored) Yes Yes No