Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 1099 / 2536

SET-SECU 7 of 3 Page SET-SECU
are parameter this for values The
enabled
,
disabled
(default
and value),
lockout
.
to permitted type user only the state, lockout in is security When
a is port CIT/DCC out locked the through system the access
login valid a with even users, non-privileged all user; privileged
system. the access to allowed not are pair, password and
1: NOTE
users non-privileged state, lockout the in is security When
are but database, login/password the from deleted not are
active Existing system. the accessing from blocked simply
not are users non-privileged by initiated sessions login
to set is security if dropped) not is, (that affected
lockout
.
2: NOTE
to equal is parameter Address the If
cit-1
or
cit-2
and
to equal is Porttype
tl1
to equal is Address or ,
x25
,
is Security
enabled
this result, a As automatically.
the in show not will and for prompted not is parameter
message. confirmation
to
session inactive an before minutes, in time, the specifies Timeout
value a has This terminated. automatically is port specified the on
minutes. 15 of value default a and minutes 120 to 0 from ranging
function. timeout the disable will 0 to parameter this Setting
NOTE:
is Address of value the If
x25
is Porttype and
synch
then ,
parameter. this for prompted be not will user the
OC-3 DDM-2000
2000 February 2 Issue
11-429