Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 1361 / 2536

363-206-285 System Turnup/Circuit Order:
IXL-001
Issue 3, June 2001 Page 1 of 44
DDM-2000 OC-3 M
ULTIPLEXER
Task Index
System Turnup/Circuit Order
FIND YOUR JOB IN THE LIST BELOW . . . . . . . . . .THEN GO TO
Equipment Required for Shelf Turnup
1. IBM compatible personal computer with MS-DOS
*
Release 2.1 or later.
Used for loading software.
2. Proper software release for system configuration you have.
3. FS1E-E-02 lightguide jumpers for looping shelf OLIUs.
Initial Shelf Turnup and Establishing End-to-End System
NOTE:
These procedures are used to equip DDM-2000 OC-3 shelves, establish
end-to-end OC-3 systems, and establish initial end-to-end DS1/DS3
service after all necessary bay, shelf, and cable installation has been
done.
Equip DDM-2000 OC-3 Shelf (Looped Back) . . . . . . . . . . . System Turnup: NTP-016
System — Establish End-to-End
NOTE:
Figures 1-35 show a variety of system configurations and may be used
as a quick reference to most of the system end-to-end procedures listed
here.
* Registered trademark of International Business Machines Corporation.
NTP-016