Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 704 / 2536

CNVT-CRS 5 of 1 Page CNVT-CRS
NAME
Cross-Connection Convert cnvt-crs:
FORMAT INPUT
cnvt-crs
:
Address1
,
Address2
;
DESCRIPTION
!
CAUTION:
only should command This service. affect will command this of Execution
either supporting are cross-connections STS-1 existing when executed be
service a cause will command this Executing services. DS1 or services no
services. DS1 associated on milliseconds 25 approximately of interruption
page. next the on note the to also Refer
individual 28 to cross-connection STS-1 existing an converts command This
within carried signals VT1.5 endpoints. same the with cross-connections VT1.5
or upstream the in slots time same the in appear will STS-1 original the
takes conversion the after and before multiplexers DDM-2000 downstream
to networks STS-1 existing of upgrade easy an enables conversion This place.
hardware. all reconfigure will command This networks. DS1
releases ring For releases. ring and linear OC-3 with available is command This
all of CrsType the defined, is (CrsType) type cross-connection the where
the of CrsType the as same the be will cross-connections VT1.5 converted
if is, That conversion. before cross-connection STS-1
CrsType= dc
the for
be will cross-connections VT1.5 all cross-connection, STS-1
CrsType= dc
also.
be must packs circuit OLIU 27-type or 26-type, 29-type, 24-type, 22-type, The
OC-3 in available is OLIU 24-type The cross-connections. convert to used
in available is OLIU 29-type The releases. ring OC-3 later and 11.0 Release
releases. ring OC-3 later and 15.0 Release OC-3
11-34
2000 February 2 Issue
OC-3 DDM-2000