Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 1011 / 2536

RTRV-ULSDCC-L4 6 of 3 Page RTRV-ULSDCC-L4
are: parameters output The
data L4TM
following the string, this under and string a only is This
identified: are parameters
L4tlif
lifetime TARP the on reports parameter This
local the by originated PDUs TARP in parameter
maximum the specifies lifetime TARP The NE.
PDU. TARP a for allowed hops of number
the exceeded, is hops of number this When
This forwarded. be not will PDU TARP
1 from range the in value a have may parameter
is parameter this for value default The 65535. to
100.
L4t1tm
T1. Timer TARP the indicates parameter This
to response for waiting time maximum the is T1
1 level (search PDU request 1 Type TARP
value a have may parameter This area). routing
default Its seconds. 3600 to 1 from range the in
seconds. 15 is value
L4t2tm
T2. Timer TARP the indicates parameter This
to response for waiting time maximum the is T2
of outside (search PDU request 2 Type TARP
value a have may parameter This area). 1 level
default Its seconds. 3600 to 1 from range the in
seconds. 25 is value
L4t3tm
T3. Timer TARP the indicates parameter This
to response for waiting time maximum the is T3
example: 5, (type request resolution Address
is address NSAP the when TID the requesting
in value a have may parameter This known).
default Its seconds. 3600 to 1 from range the
seconds. 40 is value
L4t4tm
T4. Timer TARP the indicates parameter This
error for used is It expires. T2 when starts T4
in value a have may parameter This recovery.
default Its seconds. 3600 to 1 from range the
seconds. 20 is value
L4lftm
Loop TARP the indicates parameter This
time the sets It Timer. Flush Buffer Detection
Detection Loop TARP the flushing for period
the in value a have may parameter This Buffer.
value default Its minutes. 1440 to 1 from range
minutes. 5 is
OC-3 DDM-2000
2000 February 2 Issue
11-341