Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 847 / 2536

RTRV-CRS-STS1 3 of 1 Page RTRV-CRS-STS1
NAME
STS-1 Cross-Connection Retrieve rtrv-crs-sts1:
FORMAT INPUT
rtrv-crs-sts1
[:
Address
];
DESCRIPTION
system. DDM-2000 the within cross-connections STS-1 retrieves command This
the using entered are Cross-connections
ent-crs-sts1
command.
Main between possible are cross-connections STS-3c releases, linear OC-3 For
mode STS-3c The report. this in displayed be also will and slots, FN-C and slots
to set be must
enabled
the using
set-oc3
command.
NOTE:
during example, (for types pack different with equipped are 2 and 1 slots If
time the at considered is what for data include will report this upgrade), an
type. pack system valid the as
license special a requires that feature optional an are cross-connections STS-3c
for Provisioning," and "Administration 8, Chapter See Technologies. Lucent from
information. additional
cross- VT1.5 A exist. cross-connections VT1.5 any if indicates also report This
the using by obtained report, map connection
rtrv-crs-vt1
will command,
cross-connections. VT1.5 specific the show
is: parameter input The
Address
cross- which for channels STS-1 more or one of address The
is address default The reported. be to are connections
all
STS-1
system. the in channels
Addresses: Linear Valid
{a,b,c}, all,
{a,b}-{1-2,all} {m,c}-{1-3,all},
Addresses: Ring Valid
{m,c}-{1-3,all}, all,
a-{1,2,all} b-{1,2,all},
the units, Main its in OLIUs 24-type with equipped is shelf the If
are: addresses valid
m-{1-12,all}
Release OC-3 with (starting 29-type with equipped is shelf the If
are: addresses valid the units, Main its in OLIUs 15.0)
{a,b}-{1,2,all} c-{1-3,all}, m-{1-12,all},
OC-3 DDM-2000
2000 February 2 Issue
11-177