Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 651 / 2536

363-206-285
Technical Specifications
Issue 3 June 2001 10-63
The 21 alarm or status inputs can be reported through a TL1/X.25 interface. The
first 10 of these can also be reported through discrete telemetry outputs at the CO
end. The first 15 of these inputs can also be reported through TBOS scan points.
Order Wire 1 0
The DDM-2000 OC-3 Multiplexer uses the E1 byte in the SONET overhead and
provides a 64 kb/s complementary metal oxide semiconductor (CMOS) or
transistor-transistor logic (TTL) compatible interface to an external order wire shelf
to provide point-to-point voice communication between DDM-2000 OC-3 systems.
If the DDM-2000 OC-3 Multiplexer is using R8.1 or R9.1, a proprietary MUX order
wire capability is available for use in
MegaStar 2000. The MUX order wire mode
provides access to the E1, E2, and F1 SONET overhead bytes in a proprietary
1.544 Mb/s data stream for use with the Harris-Farinon mini-CSU equipment.
The DDM-2000 OC-3 Multiplexer system has been tested with the DANTEL
*
Order wire Assembly A18-04588-02.
* DANTEL is a registered trademark of Dantel, Inc.