Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 996 / 2536

RTRV-T1 4 of 1 Page RTRV-T1
NAME
T1 Retrieve rtrv-t1:
FORMAT INPUT
rtrv-t1
[:
Address
];
DESCRIPTION
or one of attributes and information configuration the displays command This
set as ports, pack) circuit TMUX BBG20 the (within DS1 "internal" or DS1 more
the by
set-t1
command.
that port DS1 a on later and 13.0 Release OC-3 in used is command this When
all for displayed be will (-) dashes pack, circuit TMUX BBG20 a with associated is
Format. and Mode PM the except parameters
that port DS1 a on later and 15.0 Release OC-3 in used is command this When
all for displayed be will (-) dashes pack, circuit LAN IMA an with associated is
and Mode PM State, Port Level, Alarm Address, Port the except parameters
Format.
is: parameter input The
Address
TMUX the (within DS1 "internal" or DS1 the identifies Address
be may ports more or One port(s). pack) circuit (BBG20)
is address default The specified.
all
.
Addresses: Valid
{a,b,c}-{1-7,all}-{1-4,all} all,
supports 15.0) Release (OC-3 pack circuit (BBF6) T1EXT The
port only BBF6, a on ports addressing When ports. T1 two
Specifying valid. are 2 and 1 numbers
all
and 1 ports selects
only. 2
page. following the on appears report output The
11-326
2000 February 2 Issue
OC-3 DDM-2000