Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 921 / 2536

RTRV-PM-T1 5 of 1 Page RTRV-PM-T1
NAME
T1 Monitoring Performance Retrieve rtrv-pm-t1:
FORMAT INPUT
rtrv-pm-t1
:
Address
;
DESCRIPTION
DS1 more or one with associated data parameter the displays command This
performance DS1 the if only available is and system the through passing signals
the via set is feature monitoring
set-feat
command.
registers. daily to addition in PM, DS1 for available are registers Quarter-hour
the to apply also will command this releases, later and 13.0 Release OC-3 In
Starting pack. circuit TMUX BBG20 the on monitoring performance path DS1
path DS1 the to applies also command this 15.0, Release OC-3 with
pack. circuit LAN IMA and T1EXT the on monitoring performance
addressed are LAN IMA the by occupied slots Speed Low consecutive two The
them. in inserted packs circuit LAN IMA Quad-DS1 separate two had they if as
the ls-a-2, and ls-a-1 slot into inserted is pack circuit LAN IMA an if instance, For
a-2-{1-4,all}. a-1-{1-4,all}, follows: as addressed be will DS1s
is: parameter input The
Address
ports. DS1 of address the is Address
Addresses: Valid
{a,b,c}-{1-7,all}-{1-4,all} all,
ports addressing When ports. T1 2 supports pack circuit BBF6 The
Specifying valid. are 2 and 1 numbers port only BBF6, a on
all
only. 2 and 1 ports selects
OC-3 DDM-2000
2000 February 2 Issue
11-251