Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 2000 / 2536

363-206-285 Trouble Clearing:
TAP-112
Issue 2, February 2000 Page 2 of 16
DDM-2000 OC-3 M
ULTIPLEXER
3.
NOTE:
Local alarm or status conditions have a
Source Address
of the local
slot, line, port, channel, path, cross-connection, or operations interface
(DCC, X.25, etc.) where the event occurred. (See
Addresses in the
Commands and Reports section of this manual.) Use the
rtrv-alm:
command to get another report, if necessary.
Note the trouble indication in the
Description
column of the
Active
Alarm and Status Report
, starting with the highest alarm level (Minor)
listed in the
Alarm Level
column.
4. Use
opr-aco;
command to silence active audible office alarms, if required.
5. Find the trouble description in Table A for the highest alarm level and go to the
indicated step or procedure.