Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 671 / 2536

Issue 2 February 2000
11-1
11
Commands and Reports
1 1
Overview
1 1
This chapter describes the command and report features of the American
Standard Code for Information Interchange (ASCII) terminal interface to a DDM-
2000 OC-3 Multiplexer. It provides detailed information about each command, as
well as system report outputs and explanations.
Reason for Ressue 1 1
This chapter has been updated toprovide the details of software commands for
OC-3 Release 15. This release features Target ID Address Resolution Protocol
(TARP) which provides for multi-vendor interworking. For additional information on
TARP, please refer to the “About This Document” sections.
The following new commands are available in OC-3 Release 15:
— rtrv-lan
— rtrv-pm-lan
— set-lan
Please note that the 29G-U OLIU circuit pack must be present in the Main slots of
the DDM-2000 OC-3 shelves for these new commands to properly execute.
Please refer to the TOP section of this document for instructions on properly
installing these circuit packs in a shelf.
Command Page Format
1 1
This chapter includes DDM-2000 commands that are presented as one- or
multiple-page entires in alphabetical order. The name of each command appears
at the top of each page.