Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 733 / 2536

DLT-ULSDCC-L4 3 of 1 Page DLT-ULSDCC-L4
NAME
DCC Section Layer Upper Delete dlt-ulsdcc-l4:
FORMAT INPUT
dlt-ulsdcc-l4
:[
L4ajsys= AJSystemId
][
L4tdctid= TDCTID
];
DESCRIPTION
NOTE:
the of functionality the describes page command This
dlt-ulsdcc-l4
releases. TARP later all and 13.0 Release OC-3 in command
7 through 3 Layers of parameters provisionable delete to used is command This
stack This stack. protocol 7-layer (OSI) interconnection systems open the of
network for structure logical a is which model reference OSI the to refers
between protocol communication standard a defines model This operations.
Organization Standards International the by specified as elements network
(ISO).
user-settable hold which buffers in data of row a delete to used is command This
Manually TARP the are buffers These stack. OSI the of 4 Layer in parameters
(TDC). Cache Data TARP the and buffer NE Adjacent
NOTE:
users privileged to available is command this then enabled, is security If
shelf. the on ports DCC or CIT all for only
are: parameters input The
L4ajsys
the of field Identifier System NSAP the specifies parameter This
Adjacency Manual TARP the from deleted be to NE adjacent TARP
TARP the of field digit) hex (12 byte 6 a is This NE. local of list
System the NE, each for unique is ID System the Since NE. adjacent
Adjacency. Manual specific a identify to sufficient is ID
is parameter this of format The
L4ajsys= AJSystemId
where ,
AJSystemId
NSAP the of field ID System hex) (12-digit byte 6 the is
list. the in NE Adjacent the of address
Multiple NE. Adjacent Manual single a deletes parameter This
the of occurrences multiple using deleted are NEs Adjacent Manual
dlt-ulsdcc-l4
command.
OC-3 DDM-2000
2000 February 2 Issue
11-63