Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 841 / 2536

RTRV-ATTR-ALM 2 of 1 Page RTRV-ATTR-ALM
NAME
Alarm Attribute Retrieve rtrv-attr-alm:
FORMAT INPUT
rtrv-attr-alm;
DESCRIPTION
the by provisioned as attributes, alarm current displays command This
set-attr-alm
command.
follows: as appears report output The
t r o p e R s e t u b i r t t A m r a l A m e t s y S * /
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= ) l e d m l a ( y a l e D m r a l A l e d m l a = ) l e d r l c ( y a l e D r a e l C , l e d r l c = N M P , n m p
/ *
are: parameters output The
Delay Alarm
incoming for seconds in delay holdoff alarm the shows This
with integer an is parameter This failures. equipment and signal
30. through 0 of range a
Delay Clear
equipment for seconds in delay clear alarm the shows This
through 0 of range a with integer an is parameter This failures.
30.
PMN
minor power a during raised be to level alarm office the is PMN
or (major) MJ values the has parameter This condition. alarm
level. alarm the indicating (minor) MN
NOTE:
the to subject are signals FERF and AIS, conditions, failure signal Incoming
delay. clear 15-second fixed a and delay holdoff alarm provisionable
pack Circuit delays. clear or holdoff to subject not are signals Yellow
provisionable the to subject are failures) pack circuit control (except failures
delays. clear and holdoff alarm
OC-3 DDM-2000
2000 February 2 Issue
11-171