![background image](http://html.mh-extra.com/html/keithley/6430/6430_instruction-manual_661765040.webp)
1-8
Getting Started
Operation keys:
EDIT
Select source or compliance reading for editing.
TOGGLE
Toggle display positions of source and measure readings, or display V and I
measurements.
LOCAL
Cancel remote operation.
REL
Enable/disable relative reading on present function.
FILTER
Display digital filter status for present function and toggle filter on/off.
LIMIT
Perform configured limit tests.
TRIG
Trigger a measurement from the front panel.
SWEEP
Start configured sweep.
and
Move through parameter values or selections within functions and operations.
DIGITS
Change number of digits of display resolution.
SPEED
Change measurement speed by selecting accuracy or specifying NPLC.
STORE
Set buffer size and enable reading storage.
RECALL
Display stored readings and timestamp.
CONFIG
Press CONFIG and then appropriate key to configure function or operation.
MENU
Access and configure Main Menu selections. When entering numeric data, use to
clear reading to minimum absolute value.
EXIT
Cancels selection. Use to back out of menu structures.
ENTER
Accepts selection.
RANGE keys:
▲
Moves to next higher range, increments digit, moves to next selection.
▼
Moves to next lower range, decrements digit, moves to previous selection.
AUTO
Enables or disables measurement auto range.
Annunciators:
EDIT
Instrument in edit mode.
ERR
Questionable reading, invalid cal step.
REM
Instrument in GPIB remote mode.
TALK
Instrument addressed to talk over GPIB.
LSTN
Instrument addressed to listen over GPIB.
SRQ
Service request over GPIB.
REAR
On = Remote Preamp not connected. Off = Remote Preamp connected.
REL
Relative measure reading displayed.
FILT
Digital filter enabled.
MATH
Math function enabled.
4W
Remote sensing enabled.
AUTO
Autoranging enabled.
ARM
Source-measure operations being performed.
TRIG
External trigger source selected.
*
Reading being stored.
Source control:
ON/OFF
Turns the source on or off.
Handle:
Pull out and rotate to desired position.
▲
▲
Summary of Contents for 6430
