![background image](http://html.mh-extra.com/html/keithley/6430/6430_instruction-manual_661765050.webp)
1-18
Getting Started
Restoring setups
1.
Press the MENU key, select SAVESETUP, then press ENTER.
2.
From the SAVESETUP menu, select GLOBAL, then press ENTER.
3.
From the GLOBAL SETUP MENU, select RESTORE, then press ENTER.
4.
Select the setup position (0-4) to restore, then press ENTER to complete the process.
Power-on con
fi
guration
You can also define which of the stored setups (factory default or user) the instrument
assumes as the power-on configuration as follows:
1.
Press the MENU key, select SAVESETUP, then press ENTER.
2.
From the SAVESETUP menu, select GLOBAL, then press ENTER.
3.
From the GLOBAL SETUP MENU, select POWERON, then press ENTER.
4.
From the SET POWER-ON DEFAULT menu, choose the power-on configuration:
BENCH or GPIB (see below), or USER-SETUP-NUMBER.
5.
If you chose to use a user setup as the power-on configuration, select the user setup
number, then press ENTER.
Factory default settings
As summarized in Table 1-3, there are two sets of factory defaults, BENCH (front panel) and
GPIB (remote). You can restore either of these default conditions as follows:
1.
Press the MENU key, select SAVESETUP, then press ENTER.
2.
From the SAVESETUP menu, select GLOBAL, then press ENTER.
3.
From the GLOBAL SETUP MENU, select RESET, then press ENTER.
4.
Select BENCH or GPIB defaults as desired, then press ENTER to complete the
process.
Summary of Contents for 6430
