manualshive.com logo in svg

Intel IXP45X, Developer'S Manual

Share
Download
Intel IXP45X Developer'S Manual Download Page 48

Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network Processors—Functional Overview

Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network Processors

Developer’s Manual

August 2006

48

Reference Number: 306262-004US

2.1

Key Functional Units

The following sections briefly describe the functional units and their interaction in the 

system.

Unless otherwise specified, the functional descriptions apply to all of the IXP45X/

IXP46X network processors. 

For details on feature support listed by processor model, see the Intel

®

 IXP45X and 

Intel

®

 IXP46X Product Line of Network Processors Datasheet. 

2.1.1

Network Processor Engines (NPEs)

The network processor engines (NPEs) are dedicated-function processors containing 

hardware coprocessors integrated into the IXP45X/IXP46X network processors. The 

NPEs are used to off-load processing function required by the Intel XScale processor.

These NPEs are high performance, hardware multi-threaded processors with additional 

local hardware assist functionality used to off-load highly processing intensive functions 

such as MII (MAC), CRC checking/generation, AAL segmentation and re-assembly, AES, 

AES-CCM, DES, SHA-1/256/384/512, MD5, etc.

All instruction code is stored locally for the NPEs, each of which has a dedicated 

instruction memory bus and dedicated data memory bus.

These NPEs support processing of the dedicated peripherals that can include:

• One UTOPIA Level 2 (Universal Test and Operation PHY Interface for ATM) interface
• Two High-Speed Serial (HSS) interfaces
• Up to three Media-Independent Interface (MII) or Serial Media Independent 

Interfaces (SMII) 

There are several possible combination of interfaces for the NPEs contained on the 

IXP45X/IXP46X network processors. These interface combinations are configured by 

setting expansion bus address straps during reset. Detailed information on settings can 

be found in the Intel

®

 IXP45X and Intel

®

 IXP46X Product Line of Network Processors 

Datasheet. Refer to the Intel

®

 IXP4XX Product Line of Network Processors Specification 

Update as well to ensure the most up-to-date information regarding corrections to 

documentation.

The NPE core is a hardware multi-threaded processor engine separate from, but 

operating in parallel with the Intel XScale processor. The NPE is used to off-load and 

accelerate network data packet processing that would otherwise take processing cycle 

time on the Intel XScale processor. Each NPE core is a 133.32-MHz processor core that 

has self-contained instruction memory and self-contained data memory that operate in 

parallel. Each NPE core has 4 K words of instruction memory and 4 K words of data 

memory.

In addition to having separate instruction/data memory, the NPE core supports 

hardware multi-threading with support for multiple contexts. The support of hardware 

multi-threading creates an efficient processor engine with minimal processor stalls due 

to the ability of the processor to switch contexts in a single clock cycle, based on a 

prioritized/preemptive basis. The prioritized/preemptive nature of the context switching 

allows time-critical applications to be implemented in a low-latency fashion — which is 

required when processing multi-media applications.

The NPE core also connects to several hardware-based coprocessors that are used to 

implement functions that are difficult for a processor to implement. These functions 

include:

Summary of Contents for IXP45X































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands