Fiat Punto 2004 Training Manual Download Page 473

Page: 473 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Position 2: device OFF (the door can be opened from inside the vehicle).

The device will remain ON even if the doors are unlocked electrically.

The other window regulators are controlled directly from their respective doors.

The front electric window regulators can be operated only manually: the window start and stop

are controlled manually by the user by pressing the respective button. When the latter is

released, the motor will stop. The window regulating function can be actuated on both sides

(right & left) only when the key is inserted.

NOTE

. Do not actuate the rear door locking emergency device simultaneously with the child

safety device.

9.4 Electric window regulators

9.4.1 General remarks

The electric window regulator controls for both the front doors (all the range versions) and the

rear doors (where available) are managed on the driver’s side front door.

Controls and operation (front window regulators only).

Versions not equipped with the automatic device.

Following the key-OFF, the front windows can only be actuated manually over a period of 3

minutes. After this time has elapsed, the system will not be acquiring new commands any

more.

Version equipped with the automatic device (on the driver’s side).

gb Fiat Grande Punto OK

472 / 532

The driver’s side window regulator can be operated both manually and automatically. The

passenger’s side window can be operated in manual mode only.

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands