Fiat Punto 2004 Training Manual Download Page 449

Page: 449 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

9.2.7 Rear parking sensor node (PAM)

General remarks

The parking assist system provides the driver, during the reversing operation, and information

on the distance when approaching obstacles placed behind the vehicle. This device helps you

park the vehicle in safer conditions, since it makes it possible to locate any obstacle found out

of the driver’s field of vision.

The obstacle presence/distance information is transmitted to the driver through acoustic pulse

signals, the frequency of which varies with the vehicle’s distance from the obstacle.

By combining the visual information with the acoustic information generated by the system, the

driver will be able to avoid collisions.

The parking sensor node (PAM) is an electronic component connected to the B-CAN network

and the body-to-front cable harness, which assists driving during the manoeuvres with the

reverse gear engaged, thus recognizing any obstacle at the rear. The interfaces for the

sensors on the rear bumpers, the trailer control unit, and a buzzer placed into the IPC

instrument board node are provided on the PAM parking sensor node.

The parking assist system of FIAT Nuova Punto is made up of the following components:

- ultrasound sensors on the rear bumper;

- one dedicated electronic control unit;

Active ultrasound sensor

Electronic control unit drawing

gb Fiat Grande Punto OK

448 / 532

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands