Fiat Punto 2004 Training Manual Download Page 2 | Manualshive

Page: 2 / 533

Fiat Punto 2004 Training Manual Download Page 2

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

DOCUMENTATION MODIFICATIONS / UPDATES

Date

Referent

File name

Description of modification

FIAT PUNTO

2 / 532

© 2004 Fiat Auto S.p.A. – All rights reserved.

© 2004 - Fiat Auto S.p.A.
All rights reserved. No part of this publication may be reproduced or disclosed in any form or by any means.
Processing the material below may not involve specific responsibilities for unintentional errors or omissions.
The information given in this publication are liable to continuous updates: Fiat Auto S.p.A. undertake no
responsibility for the consequences resulting from the use of outdated information.
This publication is issued for training purposes only.
As regards the technical information, complete and updated for servicing purposes, please refer to the
service manual and any other service information for the vehicle model concerned.

«
1
2
3
4
...
»

Summary of Contents for Punto 2004






















































































































































































































































































































































































































































































































































Reviews:

No comments