Fiat Punto 2004 Training Manual Download Page 480

Page: 480 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

move the right or left front window to its lower end of travel, and keep the opening control

depressed for a time of 5 to 10 seconds, then carry out the same operation with the upper end

of travel, by keeping the closing control depressed for a time of 5 to 10 seconds.

9.5 External lighting

General remarks and components

Dimmers

When the user turns on the dimmers (with the key ON) or requests the “parking light” or

“Follow me home” (with the key OFF) function, the trip computer will command the actuation of

the dimmer bulbs (left/right; front/rear). Except for the “Follow me home” function, some

requests will involve switching the license plate lights on.

Low-beam/high-beam headlights

With the low-beam headlights ON, the actuation of the high-beam headlight control will disable the

low-beam headlights. Subsequent deactivation of the high-beam headlight control (still with the

low-beam headlight control ON) will involve switching the low-beam headlights on again.

Parking lights

This function makes it possible to switch both the dimmers and the license plate lights on with

the vehicle key OFF, in order to signal the presence of the vehicle when the latter is stationary

(parking). It can be actuated only with the key OFF by turning the steering column stalk light

ring from OFF

dimmers or low-beam headlights.

The function can be deactivated by moving the steering column stalk light ring to OFF or upon

the key-ON. The latter operation will reset the function, and the trip computer will control the

lights according to the control selected on the steering column stalk ring.

Every time the key is next OFF, the function will no longer be active: it can be actuated again

by repeating the aforesaid actuating operation.

gb Fiat Grande Punto OK

479 / 532

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands