Fiat Punto 2004 Training Manual Download Page 446

Page: 446 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

“Set” function:

this function, actuated through discrete action of the lever towards the “+” or

“–“ sign, makes it possible to set and maintain, in the Cruise Control, the vehicle speed to the

value corresponding to the instant when the lever is actuated.

“Accelerate” function:

this function makes it possible to increase the vehicle speed

previously set in the Cruise Control, so as to generate, as long as the lever is kept operating in

the “+” direction, a steady-slope acceleration ramp. When the lever is released, the system will

maintain and memorize the new speed reached by the vehicle.

“Tip up” function:

this function makes it possible to increase the vehicle speed previously set

in the Cruise Control by a constant value every time the lever is slightly moved towards the “+”

sign and subsequently released, thus causing the speed to increase by steps of equal size.

When the lever is released, the system will maintain and memorize the new speed reached by

the vehicle.

“Decelerate” function:

this function makes it possible to decrease the vehicle speed

previously set in the Cruise Control, so as to generate, as long as the lever is kept operating in

the “–” direction, a steady-slope deceleration ramp. When the lever is released, the system will

maintain and memorize the new speed reached by the vehicle. The system may only reduce

the set speed (not the actual speed) if the engine is already pulled (e.g. vehicle running

downhill and high gear).

gb Fiat Grande Punto OK

445 / 532

“Tip down” function:

this function makes it possible to decrease the vehicle speed

previously set in the Cruise Control by a constant value every time the lever is slightly moved

towards the “–” sign and subsequently released, thus causing the speed to decrease by steps

of equal size. When the lever is released, the system will maintain and memorize the new

speed reached by the vehicle.

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Fiat Punto 2004, Training Manual, Page: 446 / 533

Search results

Summary of Contents for Punto 2004

Reviews: