ELECTRIC
SYSTEM
FIAT PUNTO TRAINING OUTLINE
Fiat Auto S.p.A.
After Sales Training
Other functions:
Clock
As regards the Mode and Comfort panels, the hour/minute indication will always be available,
both upon key-ON and key-OFF. As regards the Matrix panel, the hour/minute indication will
be available only upon key-ON: the clock will not be displayed upon key-OFF.
Time setting as an item of the set-up menu
As regards the Comfort and Matrix panels, the “24 h” (0–23 h) or “12 h” (1–12 h) mode can be
selected from the set-up menu. The “AM” and “PM” indications will not be displayed. As
regards the Mode panel, only the “24 h” mode can be displayed, since the respective set-up
menu item is not available.
Headlamp trim correction (“C.A.F.”)
The headlamp trim correction function provides for 4 preset vertical headlamp orientation.
These positions can be obtained by pressing the “CAF+” (light beam raising) and “CAF–“ (light
beam lowering) buttons: an electric motor connected inside the headlamp causes the
reflectors to be rotated automatically.
The current headlamp position is signalled on the vehicle panel by the headlamp inclination
icon and the corresponding number (0 to 3).
The C.A.F. buttons are active only when the key is ON and the low-beam headlamps have
been switched on.
Upon key-OFF, the function is disabled, and the vehicle panel memorizes the position of the
headlamp trim corrector. When the low-beam headlamps are not active any longer, handling
will be disabled and the current position of the headlamp reflectors will be maintained.
Upon key-ON, and when the low-beam headlamp ON control is available, both the “headlamp
trim corrector” symbol and the number for the current position will light up on the instrument
board display.
gb Fiat Grande Punto OK
423 / 532
© 2005 Fiat Auto S.p.A. – All rights reserved.
When the low-beam headlamps are switched off, both the symbol and the respective number
will go out, and the function will be disabled.