Fiat Punto 2004 Training Manual Download Page 31

Page: 31 / 533

BRIEFING

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Those who own I-Pod Applemay choose a dedicated set that allows the former to be used by

controlling its content through the factory-installed radio system.

1.3.3 Safety

The vehicle active and passive safety is ensured by a special range of alarms and the parking

sensor kit, to be positioned on the license plate sides.

The traditional anti-theft system, provided in a modular make-up with door opening-

closing/actuation remote control, exchanges data through the CAN network with the vehicle’s

electronic control unit. Any break-in is signalled by a siren located in the engine compartment.

The CLEAR BOX, or GPS-GSM locator, is the best device that current technology may offer in

the field of automotive satellite/cellular protection.

The ACCESSORY LINE module matched with the traditional anti-theft system allows you to

always keep your vehicle under control, by clearly identifying its position, and also receive any

break-in message.

The ultrasound parking sensor is actuated when the reverse gear is engaged and gives out an

acoustic signal to warn you of the obstacles that cannot be seen by means of the rear-view

mirrors.

FIAT PUNTO

31 / 532

Moreover, the Bluetooth “MetaBlue” hand-free set system makes it possible to easily speak on

the mobile phone without handling the same, with no connecting cable. The calls are managed

by means of one single control button, and you can listen to the person you are talking to

directly through the vehicle’s audio system, both is the radio has been factory-installed and if

the unit is owned by the customer, and even if only the (loudspeaker) preset is available. All of

this means safe, comfortable driving, in compliance with the rules of the Highway Code.

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands