Fiat Punto 2004 Training Manual Download Page 482

Page: 482 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

The trip computer will diagnose the rear fog light: if an anomaly is found, the corresponding

“rear fog light failure” signal will be actuated.

Indicator/emergency lights

Following the indicator light controls by means of the steering column stalk left lever (upon

key-ON), the trip computer will drive the single indicator light bulbs of the selected vehicle side

(front, side and rear left, or front, side and rear right).

Simultaneously with the bulb driving, an acoustic signal will be generated inside the vehicle. If

the lever is moved to the rest position again, the lights and the other turning indications will go

out.

The indicator lights will, if they are ON, be switched off upon key-OFF.

Following the emergency light control (with both key-ON and key-OFF), the trip computer will

drive all the 6 indicator bulbs (front, side and rear, both left and right): moreover, the LED will

light up on the emergency button, and an acoustic signal will be generated inside the

passenger compartment.

If the emergency button is pressed with “indicator lights”, the lights/indications previously ON

will keep on operating intermittently, with no interruption or delay.

If an anomaly is found on any of the front or rear indicator light bulbs (on the vehicle side

selected for the “indicator light” function or still for the “emergency light” function), the failure

indication will light up and, simultaneously, the blinking frequency of the corresponding visual

indication and the acoustic signal will increase.

N.B. The blinking frequency of the external lights and the LED (if any) on the emergency

button will not change.

Brake lights

When the brake pedal is pressed, the two brake lights and the “third brake light” will come on.

The diagnosis will be carried out for every single brake light bulb and the third brake light bulb

as well. If an anomaly is found, the failure signalling will be actuated on the instrument board

gb Fiat Grande Punto OK

481 / 532

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands