Fiat Punto 2004 Training Manual Download Page 14

Page: 14 / 533

BRIEFING

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Nuova Punto will offer to you:

Distinctive, Italian style

More space: 50 mm longer than the current Punto

Safety levels comparable with the best competing cars

Sturdiness

Diesel engines standing out in their categories: 1.3 (75 & 90 HP) and 1.9 (120 HP).

Considering that a vehicle’s line is the main appeal as regards the reasons for purchasing,

Nuova Punto means to become the leader within its own market segment by relying on a

modern, fascinating line launching out to the young world thanks to its nimbleness and

versatility that distinguish it from ordinary two-box cars.

1.2 The vehicle

1.2.1 Style

Nuova Punto features a design style and lines that are deeply rooted in the most authentic and

renowned tradition of Italian car-making, with a surprising, unexpected shapes that make it go

against the current compared with the trends followed by nearly all of the European car

manufacturers.

FIAT PUNTO

14 / 532

A ‘real’ automobile line, which originally and nicely combines style, sporting character,

elegance and beauty while following the modern customer’s tastes.

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands