Fiat Punto 2004 Training Manual Download Page 437

Page: 437 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Light selector:

it consists of a ring with 3 stable positions, located at the lever end, which is

actuated by rotation along the lever axis.

Wiping control lever

Windscreen wiper control:

the windscreen wiper is controlled by a ring with 3 stable

positions, located at the lever end, which is actuated by rotation along the lever axis. Three

different speeds can be chosen: intermittent/automatic operation, continuous speed 1,

continuous speed 2.

Window washer control:

the bi-directional pump for front window washing is actuated by

pulling the lever towards the steering wheel crown. This actuation is unstable; therefore, the

lever shall return to its rest position when it is released, thus opening the contact again.

Rear window wiper control:

the rear window wiper is controlled by turning a ring with 2

stable positions, located in the middle of the lever.

Rear window washing control:

the bi-directional pump for rear window washing is actuated

by pushing the lever towards the dashboard. This actuation is unstable; therefore, the lever

shall return to its rest position when it is released, thus opening the contact again.

gb Fiat Grande Punto OK

436 / 532

“Trip” function button:

by pressing the unstable button located at the lever end, the “Trip”

function will be commanded to the vehicle panel.

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Fiat Punto 2004, Training Manual, Page: 437 / 533

Search results

Summary of Contents for Punto 2004

Reviews: