Fiat Punto 2004 Training Manual Download Page 422

Page: 422 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Preventive maintenance signalling (Comfort and Matrix panels)

When the term of the preventive maintenance (the so-called “servicing slip”) is about to expire,

the “Service” message and the “Wrench” icon (followed by the number of kilometres, or miles,

left before the vehicle is to be serviced) will be automatically display upon key-ON (after the

initial check procedure).

The displaying information can also shown on the display at the user’s request, by selecting a

special item in the set-up menu, regardless of the set expiry: the display will show the

kilometres (or miles) left before the vehicle is to be serviced. In this case, the “Wrench” icon

will not appear.

The preventive maintenance schedule provides for 9 “servicing slips” organized in such a way that

each of them is carried out not later than 30,000 km (or 18,000 miles) from the preceding one.

Automatic displaying

The first expiry message will be automatically displayed only once upon key-ON if the

kilometres (or miles) left before the vehicle is to be serviced are equal to or less than

≤

2,000

km (1,240 miles).

Next, the message will be displayed only once upon key-ON, with the following threshold

values:

1,800, 1,600, 1,400, 1,200, 1,000, 800, 600, 400, 200, 100, 50 km

1,240, 1,116, 992, 868, 744, 620, 496, 372, 248, 124, 62, 31 miles will no longer be displayed

during the time period in between.

When the limit expiry value (0 km/miles) has been reached, the “Servicing expired” message

will be displayed. The driver can interrupt this message by pressing the “Menu/Esc” button.

Displaying at request

The expiry value can be displayed at request at any time by means of a specific item of the

set-up menu.

gb Fiat Grande Punto OK

421 / 532

When the limit expiry value (0 km/miles) has been reached, the “Servicing expired” message

will be displayed.

Summary of Contents for Punto 2004































































































































































































































































































































































































































































































































Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands

Fiat Punto 2004, Training Manual

Search results

Summary of Contents for Punto 2004

Reviews:

Related manuals for Punto 2004

Brands by name

Popular brands