ETC Element Classic, User Manual

Page: 247 / 687

Manual Control 233
Note:
Multiple color picker tabs with different color spaces can be opened at the
same time. Multiple color spaces can be opened on the same tab.
The available color spaces are:
Note:
When a fixture is in HS mode, the brightness control is not provided. Intensity
controls the brightness.
For the CIE xy (CIE 1931) and CIE uv (CIE 1976), the triangle represents the RGB space as
defined by the PLASA standard E1.54. Fixtures that comply to that standard can achieve any
color within the triangle. The cone represents the color spectrum that we can see.
Controls
Each color space has three virtual encoders, a vertical encoder, a {?} button, and a {^} button.
The encoders will change based on the color space selected. Double tapping in a virtual
encoder will cause it to jump to the location of your finger. Pressing and holding will cause the
encoder to fade toward your finger.
Tapping anywhere in the color space will cause the crosshair to move to that location. Press
and hold, then move your finger to fade the crosshair toward that location.
The {^} button will create the brightest version of the selected color. Press the {?} button to
display labels on all of the controls.
For the RGB and CMY color spaces, you can change which color control is on the vertical
encoder. Touch the label of the virtual encoder to change which color control is located on the
vertical encoder. In the following graphics, Red is on the vertical encoder in the first one and
green is on the vertical encoder in the second one. This is also indicated by the highlighted
encoder name.